Fluke Networks MicroScanner Cable Verifier Price in Nairobi Kenya

Fluke Networks MicroScanner Cable Verifier Price in Nairobi Kenya

  • Straightforward Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
  • Multimedia Support – Tests all common media types including RJ11, RJ45, Coax(MS2 only), with no need for adapters
  • IntelliTone Toning – Trace virtually any cable or wire pair with IntelliTone digital and analog toning
  • VDV Service Detection – Verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE
  • Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or a dark closet
  • Magnetic Strap (included in MicroScanner kits) – Allows technicians to keep their hands free and their tester safe from potential drops and accidents with strong rare earth magnet
SKU: fluke-microscanner-cable-verifier Category:

Product Description

Specifications

 

MicroScanner2 and MicroScanner PoE Specifications

Specifications apply at 23 °C (73 °F), unless otherwise noted.

Environmental Specifications
Operating temperature 32 °F to 113 °F (0 °C to 45 °C)
Storage temperature -4 °F to +140 °F (-20 °C to +60 °C)
Operating relative humidity (% RH without condensation) 90 % (50 °F to 95 °F 10 °C to 35 °C)
75 % (95 °F to 113 °F 35 °C to 45 °C)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2)
1 m drop test with and without wiremap adapter attached
Safety IEC 61010-1 3rd Edition
Altitude 4,000 m; Storage: 12,000 m
EMC IEC 61326-1
General Specifications
Test connectors Shielded 8-pin modular jack accepts 8-pin modular (RJ45) and 4-pin modular (RJ11) plugs. MicroScanner2: F-connector for coaxial cable.
Power Battery type: 2 AA (NEDA 15A, IEC LR6) alkaline batteries
Battery life: 20 hours of typical use
Other compatible battery types: 2 AA photo lithium, NIMH, NICAD
Dimensions and weight (with batteries installed and wiremap adapter attached) 3 in x 6.4in x 1.4 in (7.6 cm x 16.3 cm x 3.6 cm)
MicroScanner2: 10.6 oz (300 g)
MicroScanner PoE: 10.6 oz (300 g)
Display Monochrome LCD with backlight
Test Modes
Cable test Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports. MicroScanner PoE also shows HIGH Ω when the resistance of the cable is more than 12.5 Ω. Displays results on one screen.
Tone Generates Intellitone™ and normal analog toning signals
PoE MicroScanner2: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices
MicroScanner PoE: Solicits and detects the presence of 802.3af, at, bt, and UPOE (Cisco’s Universal Power over Ethernet) compatible PoE devices
Performance Specifications
Cable types tested Twisted pair: UTP, FTP, SSTP
Coaxial (MicroScanner2): 75 Ω, 50 Ω, 93 Ω
Length test Range: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional error.
Calibration: User-settable NVP for twisted pair and coax (MicroScanner2). Can determine actual NVP with known length of cable.
Wiremap test Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs. The wiremap is drawn with proportional length to visually indicate the approximate location of faults.
Ethernet port detection MicroScanner2: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, and 1 Gbps.
MicroScanner PoE: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.
Tone generator Supports toning and cable mapping with a Fluke Networks digital IntelliTone™ probe. Generates four tones compatible with typical analog probes. SmartTone™ feature gives positive identification of cables in bundles when using an IntelliTone or an analog probe.

Streamlined verification testing 
The MicroScannerTM Cable Verifier series simplifies the testing of voice, data, and video cable. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device.  What’s more, it supports virtually any type of low-voltage cable testing with no need for awkward adapters.  The end result is reduced test time and technician error.  That makes high-quality installations more efficient than ever.

Rule out service problems fast
Today’s communications technicians have a lot more problems to deal with than just the cabling.  They have to rule out a whole host of potential cable and service issues before determining the cause of a connection problem.  The MicroScanner Cable Verifier series is equipped to answer the question to reduce time troubleshooting. Is there telephone voltage?  What’s the polarity?  Is there an Ethernet switch at the far end?  Is PoE available?  If PoE is available, is it enough to run my device? The MicroScanner Series acknowledges this, giving technicians the vision to verify today’s most common voice, data, and video services. That means faster, more comprehensive troubleshooting.”

 

Comparison Chart
MicroScanner2 MicroScanner PoE
Twisted Pair (RJ-11, RJ-45)
Wiremap
Length / Distance to Fault
Coaxial
Length / Distance to Fault
Service Identification
Reports Maximum Power Class
10/100/1000BASE-T
2.5GBASE-T, 5GBASE-T, 10GBASE-T
Power Over Ethernet 802.3af 802.3af, 802.3at, 802.3bt
Analog and Digital Toning
Optional Remote Identifiers

Models

Model Number/Name Description
MS-POE Microscanner PoE with carrying case
MS2-100 MicroScanner2 Cable Verifier. Includes MicroScanner2 Cable Verifier with main wiremap adapter, multi-language Getting Started Guide, batteries, and Fluke Networks carry pouch

Kits

Model Number/Name Description
MS2-TTK MicroScanner2 Termination Test Kit includes: MicroScanner2 Cable Verifier, IS60 Pro-Tool Kit, IntelliToneTM 200 Probe, RJ11 and RJ 45 patch cables, lanyard, quick start guide, magnetic strap attachment, and 9 volt battery, packaged in a deluxe Fluke Networks carry case.
MS2-KIT MicroScanner2 Professional Kit includes: MicroScanner2 Cable Verifier with main wiremap adapter, remote identifiers #2-7, IntelliTone Pro 200 probe, shielded twisted-pair RJ45 patch cord, RJ11 patch cord, clip-set RJ45 to 8 alligator clip bare wire adapter, F Coax push on patch cord, accessory soft pouch, (2) AA alkaline batteries, (1) 9V alkaline battery, MicroScanner2 Getting Started Guide, Magnetic Strap Attachment, IntelliTone Pro Getting Started Guide, packaged in a deluxe Fluke Networks carry case
MS-POE-KIT Microscanner PoE Professional Kit with Intellitone Pro 200 Probe and Remote ID kit.
MS2-FTK Copper and Fiber Basic Technician’s Kit – Includes the MicroScanner (MS2-100) and SimpliFiber Pro (FTK1000) Fiber Test Kit.

Reviews

There are no reviews yet.

Be the first to review “Fluke Networks MicroScanner Cable Verifier Price in Nairobi Kenya”

Your email address will not be published. Required fields are marked *

Back to top
Open chat
This fluke-microscanner-cable-verifier product can be yours
If you have any questions, ask us.