Fluke Networks Fiber OneShot PRO Single Mode Fiber Distance and Fault Locator Price in Nairobi Kenya

Sold: 0

Works on single mode fiber, 9/125µm
1550nm output wavelength. Compatible with standard PON wavelengths: 1310, 1490, 1550 and 1625nm
Measure up to 75,459 feet (23,000 metres) of fiber in seconds
Locate severe bends, high-loss splices, breaks and dirty connectors in singlemode fiber
Measure and locate high loss connections and breaks
Locate the end of a fiber
Find potential sources of high bit error rates caused by reflectance from dirty or poor connections
Detects live optical signals before it begins testing
Quick set-up. Connect your fiber and press the Test button. No lengthy set-up necessary
Find problems quickly. Six-second test time—no more blind troubleshooting that can waste hours
Change the Index of Refraction (IOR) to improve fiber length accuracy
Visible in dark areas. Backlighted display turns off automatically
Removable SC adapter is easily cleaned
Optional LC, ST and FT interchangeable adapters are available
Long battery life, 1,500 tests (typical) from 2 AA alkaline batteries
Rugged construction; vibration and drop tested to 1 meter

SKU: Fiber OneShot PRO Category: Fiber Fault Locator

Product Description

Specifications are typical.
Dimensions	17.5 cm H 7.8 cm W 3.8 cm D .35 kg weight including batteries
Operating temperature with the battery	0ºC to 50ºC
Non-operating temperature	-20ºC to 60ºC
Operating relative humidity (without condensation)	95% (10ºC to 35ºC) 75% (35ºC to 40ºC) uncontrolled < 10ºC
Vibration	Random, 5 Hz to 500 Hz, MIL-PRF- 28800F CLASS 2
Shock	1-metre drop test
Altitude	9,842 feet/3000 metres
EMC	EN 61326-1:2004
Battery type	2 AA alkaline batteries (no battery charger)
Battery life	More than 1500 tests (typical)
Laser safety	Class 1 CDRH Complies to EN 60825-2
LCD type	Backlit black and white (segments)
Index of refraction range	1.45 to 1.5 (factory default is 1.468)
Auto turnoff	Automatically turns off after 5 minutes if no keys are pressed. Backlight turns off first.
Factory calibration interval	None
Output wavelengths	1550nm ± 20nm at 25ºC
Laser classification	Class 1 CDRH Complies to EN 60825-2
Maximum distance	75,459 feet or more than 23,000 metres
Maximum number of incidents shown	9
Distance accuracy	± (1 m + 1% x length) for reflective incidents1 ± (3 m + 1% x length) for non-reflective incidents2
Testing speed	5 seconds typical testing time
Connector	Removable/cleanable SC adapter, UPC polish
Fiber types tested	9/125μm singlemode
Detection of reflective incidents3	-45 dB default threshold (user-selectable: -24 dB to -62 dB in 1 dB increments)
Maximum reflectance measurement	-24 dB
Detection of loss incidents4	1.5 dB default threshold
Bulkhead quality	If no fiber is attached or if the connector is dirty, the troubleshooter displays 0 m or 0 ft.
Live fiber detection	Detects optical signals from 1250nm to 1625nm and shows ACTIVE LINE if a signal is there. Looks for a signal every 3 seconds after the first detection. +7 dB maximum input power.
	Conforms to relevant European Union directives
	Conforms to relevant Australian standards
	Listed by the Canadian Standards Association CSA C22.2 No. 61010.1.04
	Conforms to FCC Rules, Part A, Class A

1 ± user-configurable Index of Refraction (IOR) error ± the incident location error.

2 ± user-configurable Index of Refraction (IOR) error ± the incident location error.

3 Detects the location of an incident that has a reflectance larger than -62 dB. Detects incidents >2 m after the bulkhead connector when the bulkhead reflectance is <35 dB. Detects incidents >3 m after an incident when the incident reflectance is <35 dB.

4 Detects incidents >10 m after the bulkhead connector or any prior incident when the bulkhead reflectance is <-35 dB and the reflectance of any prior incident is <-35 dB. The maximum link loss prior to the incident is <7 dB.