APC SRT10KRMXLI Smart-UPS SRT 10000VA RM 230V Price in Nairobi Kenya

Sold: 0

SKU: SRT10KRMXLI Category: APC

Product Description

APC Smart-UPS SRT 10000VA RM 230V

10/100 BaseT Connection

Connect the device to a network using a 10 or 100 BaseT connection
Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Green mode

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
LCD graphics display

Text and mimic diagrams that display modes of operation, system parameters and alarms.

Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Scalable runtime

Allows additional run time to be quickly added as needed.
Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.

Save time with easy and convenient remote accessibility.

Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Low operating and maintenance costs with proven reliability and intelligent battery management.

Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Avoids costly power problems by keeping your IT equipment and data protected and available.

Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Peace of mind that comes with full equipment compatibility and reliability of a leader

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.
Input power factor correction

Minimizes installation costs by enabling the use of smaller generators and cabling.
Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Cold-start capable

Provides temporary battery power when the utility power is out.
Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse.
Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Audible alarms

Provides notification of changing utility power and UPS power conditions
Predicitive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification

Warns when a battery is not available to provide backup power.
User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Flash upgradeable firmware

Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.
SmartSlot

Customize UPS capabilities with management cards.
LED status indicators

Quickly understand unit and power status with visual indicators.
Serial connectivity

Provides management of the UPS via a serial port.
Network manageable

Provides remote power management of the UPS over the network.

Nominal Input Voltage

230V , 400V 3PH
Input frequency

40 – 70 Hz (auto sensing)
Input Connections

Hard Wire 3 wire (1PH+N+G), Hard Wire 5-wire (3PH + N + G)
Input voltage range for main operations

160 – 275V
Input voltage adjustable range for mains operation

100 – 275 (half load), 173 – 476 (half load)V
Other Input Voltages

220, 240, 380, 415

Battery type

Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time

1.5hour(s)
Replacement Battery

APCRBC140
Expected Battery Life (years)

3 – 5
RBC Quantity

2
Extendable Run Time

1
Extended Run Options

APC-Smart-UPS-SRT-10000VA-RM-230V
Runtime

View Runtime Graph

View Runtime Chart
Efficiency

View Efficiency Graph