APC SUM3000RMXL2U Smart-UPS XL Modular 3000VA 120V Rackmount/Tower Price in Nairobi Kenya

Sold: 0

SKU: SUM3000RMXL2U Category: APC

Product Description

APC Smart-UPS XL Modular 3000VA 120V Rackmount/Tower

Automatic internal bypass

Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Modular design

Increases adaptability with an open architecture configurable to any IT environment.
Rack/Tower convertible

Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
USB connectivity

Provides management of the UPS via a USB port (not available on all models).

Adjustable voltage sensitivity

Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Adjustable voltage-transfer points

Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Disconnected battery notification

Warns when a battery is not available to provide backup power.
Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging

Prolongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR)

Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
Intelligent battery management

Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

USB connectivity

Provides management of the UPS via a USB port (not available on all models).
Disconnected battery notification

Warns when a battery is not available to provide backup power.
Serial connectivity

Provides management of the UPS via a serial port.
LED status indicators

Quickly understand unit and power status with visual indicators.
Audible alarms

Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
Network manageable

Provides remote power management of the UPS over the network.

Predictive failure notification

Provides early-warning fault analysis ensuring proactive component replacement.
Hot-swappable batteries

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Resettable circuit breakers

Enables a quick recovery from overload events.
User-replaceable batteries

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Output power capacity

2.85 KWatts / 3.0 kVA
Max Configurable Power (Watts)

2.85 KWatts / 3.0 kVA
Nominal Output Voltage

120V
Efficiency at Full Load

95.0 %
Topology

Line Interactive
Maximum Output Current

24
Output Connections

(6) NEMA 5-15R (Battery Backup)

(2) NEMA 5-20R (Battery Backup)
Bypass

Internal Bypass (Automatic and Manual)

Interface Port(s)

DB-9 RS-232 , RJ-45 10/100 Base-T , USB
Pre-Installed SmartSlot™ Cards

AP9631
Control panel

LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators
Audible Alarm

Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO)

Optional

Surge energy rating

540Joules
Filtering

Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449