Product Description

Overview

SURTD2200XLIMFeatures

APC Smart-UPS RT 2200VA 230V – Marine

• Advanced electrical features
  Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high power efficiency
• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• Automatic internal bypass
  Supplies utility power to the connected loads in the event of a UPS power overload or fault.
• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Double conversion on-line topology
  Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source.
• Excellent footprint
  Small UPS footprint provides maximum usage of valuable electrical room floorspace
• Fast battery charging capability
  Allows for reduced battery recharge time, prevents disturbances on the distribution system by correcting the power factor, protects the battery against damage caused by deep discharge and provides backfeed protection.
• Field-replaceable power distribution panel
  Ensures compatibility with equipment that has different plug types.
• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Front-access servicing
  Simplifies installation and UPS maintenance while minimizing space requirements.
• Generator compatible
  Ensures clean, uninterrupted power to protected equipment when generator power is used.
• Global safety approvals
  UL60950, CSA60950, IEC60950, EN60950 safety approvals. Meets IEC 61000-4-5 Immunity To Surge, and GR-1089-CORE, Section 4, Lightning and AC Power Faults standards.
• High online efficiency
  Reduces utlility costs, generates less heat.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Input power factor correction
  Minimizes installation costs by enabling the use of smaller generators and cabling.
• Intelligent Battery Charging
  Microprocessor controlled, 3-stage regulated charging ensures the fastest recharge times without decreasing battery life.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Intuitive monitoring
  Step by step navigation and menu screens for critical system information and data. Information is easy to access and presented in a very intuitive way.
• LED Indicators
  Provide easy-to-read status of the unit and utility power conditions.
• Network manageable
  Provides remote power management of the UPS over the network.
• Overload protection
  Safeguards unit from damage by automatically turning it off in the event of a short circuit or overload.
• Power conditioning
  Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Predicitive failure notification
  Provides early-warning fault analysis ensuring proactive component replacement.
• Predictive replace battery date
  Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
• Programmable frequency
  Ensures compatibility with different input frequencies.
• Pure sine wave output on battery
  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Remote UPS management
  Enable management of your UPS by connecting it directly to the network.
• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Scalable runtime
  Allows additional run time to be quickly added as needed.
• Serial connectivity
  Provides management of the UPS via a serial port.
• Sine wave output
  Eliminates humming and heat generated when powering tubelights and fans.
• Single switched outlet group
  Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• Wide input voltage range
  Designed for harsh electrical environments to save battery life.

MarineFeatures & Benefits

Detailed Tech Specification

Output

• Output power capacity

  1.54 KWatts / 2.2 kVA

• Max Configurable Power (Watts)

  1.54 KWatts / 2.2 kVA

• Nominal Output Voltage

  230V

• Output Voltage Note

  Configurable for 220 : 230 or 240 nominal output voltage

• Output Voltage Distortion

  Less than 3%

• Output Frequency (sync to mains)

  50/60 Hz +/- 3 Hz user adjustable +/- 0.1

• Output Frequency (not synced)

  60Hz +/- 0.1% for 60Hz nominal, 50Hz +/- 0.1% for 50Hz nominal

• Other Output Voltages

  220, 240

• Load Crest Factor

  3 : 1

• Topology

  Double Conversion Online

• Waveform type

  Sine wave

• Output Connections
  (2) IEC 320 C19 (Battery Backup)
  (8) IEC 320 C13 (Battery Backup)
  (2) IEC Jumpers (Battery Backup)
• Bypass

  Internal Bypass (Automatic and Manual)

Input

• Nominal Input Voltage

  230V

• Input frequency

  50/60 Hz +/- 5 Hz (auto sensing)

• Input Connections

  British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P

• Cord Length

  2.5meters

• Input voltage range for main operations

  180 – 280V

• Input voltage adjustable range for mains operation

  100 – 280V

• Number of Power Cords

  1

• Other Input Voltages

  220, 240

Batteries & Runtime

• Battery type

  Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof

• Included Battery Modules

  2

• Typical recharge time

  2.5hour(s)

• Replacement Battery

  APCRBC140

• Expected Battery Life (years)

  3 – 5

• RBC Quantity

  1

• Extendable Run Time

  1

• Extended Run Options

  APC-Smart-UPS-RT-2200VA-230V-Marine

• Runtime
  View Runtime Graph
  View Runtime Chart

Communications & Management

• Interface Port(s)

  RJ-45 Serial , Smart-Slot

• Pre-Installed SmartSlot™ Cards

  AP9613

• Control panel

  LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators

• Audible Alarm

  Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm

• Emergency Power Off (EPO)

  Yes

Surge Protection and Filtering

• Surge energy rating

  555JJoules

• Filtering

  Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

• Maximum Height

  432mm , 43.2CM

• Maximum Width

  130mm , 13.0CM

• Maximum Depth

  660mm , 66.0CM

• Rack Height

  3U

• Net Weight

  54.55KG

• Shipping weight

  63.64KG

• Shipping Height

  347mm , 34.7CM

• Shipping Width

  603mm , 60.3CM

• Shipping Depth

  980mm , 98.0CM

• Color

  Black

• Units per Pallet

  6.0

Environmental

• Operating Temperature

  0 – 55 °C

• Operating Relative Humidity

  0 – 95% non-condensing %

• Operating Elevation

  0-3000meters

• Storage Temperature

  -15 – 45 °C

• Storage Relative Humidity

  0 – 95% non-condensing %

• Storage Elevation

  0-15000meters

• Audible noise at 1 meter from surface of unit

  55.0dBA

• Online thermal dissipation

  609.0BTU/hr

• Protection Class

  IP 20