Aruba J9781A 2530-48 Switch Price in Nairobi Kenya
Product Description
Aruba 2530-48 Switch (J9781A)
The Aruba 2530-48 Switch (J9781A) is a switch that provides security, reliability, and ease of use for enterprises, branch offices, and SMBs. This fully managed switch delivers full Layer 2 capabilities with enhanced access security, ACLs, traffic prioritisation, sFlow, and IPv6 host support. Right size deployment is simple with choice of 8-, 24-, and 48-port models available with Gigabit or Fast Ethernet ports, and optional PoE+.
Aruba 2530-48 Switch (J9781A) Key Features
- Cost-effective, reliable and secure Aruba Layer 2 switch series.
- Flexible Management via Aruba AirWave, Aruba Central, and Aruba ClearPass Policy Manager
- Right size deployment with choice of 8, 24 and 48 port Gigabit and Fast Ethernet models
- REST API support
- Simple deployment with Zero Touch Provisioning
The Aruba 2530 Switch Series is easy to deploy, use and manage using Aruba AirWave or Aruba Central. Aruba ClearPass offers Network Access Control and external captive portal support.
Aruba 2530-48 Switch (J9781A) Technical Specification
I/O ports and slots
- 48 RJ-45 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX); Duplex: half or full
- 2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 fixed Gigabit Ethernet SFP ports
- 1 dual-personality (RJ-45 or USB micro-B) serial console port
Physical Characteristics
- Dimensions: 17.40 (w) x 9.70 (d) x 1.75 (h) in (44.2 x 24.64 x 4.45 cm)
(1U height) - Weight: 6.3 lb (2.86 kg)
Memory and processor
- Processor: ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated
Mounting and enclosure
- Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); Horizontal surface mounting; Wall mounting
Performance
- IPv6 Ready Certified
- 100 Mb Latency: < 6.6 µs (LIFO 64-byte packets)
- 1000 Mb Latency: < 2.2 µs (LIFO 64-byte packets)
- Throughput: up to 13 Mpps (64-byte packets)
- Switching capacity: 17.6 Gbps
- MAC address table size: 16000 entries
Environment
- Operating temperature:32°F to 113°F (0°C to 45°C)
- Operating relative humidity:15% to 95% @ 104°F (40°C), noncondensing
- Nonoperating/Storage temperature: -40°F to 158°F (-40°C to 70°C)
- Nonoperating/Storage relative humidity: 15% to 90% @ 149°F (65°C), noncondensing
- Altitude: up to 10,000 ft (3 km)
- Acoustic: Power: 0 dB, Pressure: 0 dB
Electrical Characteristics
- Frequency: 50/60 Hz
- Maximum heat dissipation: 102 BTU/hr (107.61 kJ/hr)
- AC voltage: 100 – 127/200 – 240 VAC
- Current: 0.7/0.4 A
- Maximum power rating: 29.9 W
- Idle power: 17.1 W
- Notes: Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Safety
- UL 60950-1; CAN/CSA 22.2
- No. 60950-1; EN 60825;
- IEC 60950-1; EN 60950-1
Emissions
- FCC Class A; EN 55022/CISPR-22 Class A; VCCI Class A
Immunity
- Generic: EN 55024, CISPR 24
- EN: EN 55024, CISPR 24
- ESD: IEC 61000-4-2
- Radiated: IEC 61000-4-3
- EFT/Burst: IEC 61000-4-4
- Surge: IEC 61000-4-5
- Conducted: IEC 61000-4-6
- Power frequency magnetic field: IEC 61000-4-8
- Voltage dips and interruptions: IEC 61000-4-11
- Harmonics: EN 61000-3-2, IEC 61000-3-2
- Flicker: EN 61000-3-3, IEC 61000-3-3
Management
- Aruba Central and Aruba AirWave Network Management; IMC—Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB AirWave Network Management
Notes
- IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision “B” or later (product number ends with the letter “B” or later, e.g., J4858B, J4859C) are required.
Services
- Refer to the Hewlett Packard Enterprise website at www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.
Reviews
There are no reviews yet.