Cisco QSFP-100G-ER4L-S= 100 Gigabit Optical Modules Price In Nairobi Kenya
Product Description
QSFP-100G-ER4L-S= Specification
QSFP-100G-ER4L-S= Specification |
|
Description | Cisco 100GBASE QSFP Transceiver, 40KM reach over SMF, Duplex LC |
Dimensions | 13.5 x 18.4 x 72.4 mm |
QSFP Port cabling specifications |
|
Nominal Wavelength (nm) | 1295, 1300, 1304, 1309 |
Cable Type | SMF |
Core Size (Microns) | G.652 |
Modal Bandwidth (MHz*km)*1 | \ |
Cable Distance | 40km (with host FEC)
30km (without host FEC) |
Power Consumption (W) | 4.5 |
Pull Tab Color | Rad |
*1 Specified at transmission wavelength. For QSFP-40/100-SRBD, Modal Bandwidth is specified at 850nm | |
Optical characteristics |
|
Product | QSFP-100G-ER4L-S*4 |
Transmit Power (dBm) per lane*2 | Max:+6.5
Min:-2.5 |
Receive Power (dBm) per lane*2*3 | Max:-3.5
Min: -20.5*5 (with FEC) -17*5 (without FEC) |
Receive Power (dBm) per lane | Four lanes: 1295, 1300, 1304, 1309 |
*2 Transmitter and receiver power is average optical power, unless specified
*3 Optical power at RX is informative only. A received power within this range is required but does not ensure operation *4 Minimum channel insertion loss is 6.4dB for QSFP-100G-ER4L-S *5 V01 of QSFP-100G-ER4L-S allows Tx Power range with +4.5 (Max) to -2.9 (Min) and Rx Power range with -4.9 (Max) to -19.9 (Min) |
|
Environmental Conditions and Power Requirements |
|
Commercial temperature | 0 to 70°C (32 to 158°F) |
Storage temperature | -40 to 85°C (-40 to 185°F) |
Regulatory and Standards compliance |
|
Standards | •SFF-8665: QSFP+ 28 Gb/s 4X Pluggable Transceiver Solution (QSFP28) – Rev 1.8 May 10, 2013
•SFF-8636: Common Management Interface – DRAFT Rev 1.9 May 12, 2014 •802.3™-2012 IEEE Standard for Ethernet •IEEE 802.3ba Amendment of IEEE Std 802.3-2012 •IEEE 802.3bm Amendment of IEEE Std 802.3-2012 (D3.1, 1st August 2014) •GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable •GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies •GR-468-CORE: Generic Requirements for Optoelectronic Devices Used in Telecommunications Equipment •GR-1435-CORE: Generic Requirements for Multifiber Optical Connectors •RoHS 6 |
Safety | •Cable jacket of QSFP copper modules is UL E116441 Compliant
•QSFP copper cables are ELV compliant |
Reviews
There are no reviews yet.