Cisco RV260P-K9-AU / RV100 VPN Routers Price in Nairobi, Kenya. Best Cisco Supplier in Nairobi, Kenya
Cisco RV260P-K9-AU / RV100 VPN Routers Price in Nairobi, Kenya. Best Cisco Supplier in Nairobi, Kenya
Easy to configure and install, the RV260 routers can be remotely deployed using Plug and Play (PnP), are supported by the Cisco FindIT network platform, and feature a new user interface.These models have a dual-core processor that provides performance usually found only in more expensive solutions. A Small Form-Factor Pluggable (SFP) WAN port provides flexible connectivity and investment protection.
Product Description
RV260P-K9-AU Specification |
|
| Device Dimension | L x W x H:279x170x38.5 mm |
| Ethernet WAN | 1 RJ-45 SFP Gigabit combination port |
| Ethernet LAN | 8 RJ-45 Gigabit Ethernet ports
RV260P has 4 PoE ports with a 60W power budget |
| Console port | 1 RJ-45 port |
| Switch | Power on/off |
| Cabling type | Category 5 or better |
| LEDs | Power, VPN, WAN, LAN |
| Operating system | Linux |
|
LAN |
|
| VLANs | 16 |
| Port security | Yes, 802.1X |
| IPv6 | Dual stack, 6rd, 6in4 |
| WAN
|
Dynamic Host Configuration Protocol (DHCP) client, static IP, Point-to-Point Protocol over Ethernet (PPPoE), PPTP, Layer 2 Tunneling Protocol (L2TP) |
| WLAN | 3×3 802.11ac Wave 2 |
|
Security |
|
| Firewall
|
SPI firewall |
| Port forwarding and triggering | |
| Denial-of-Service prevention (DoS) | |
| Access control | IP access control lists |
| Secure management | HTTPS, username/password complexity |
| User privileges | Two levels of access: Admin and guest |
|
Network |
|
| Network protocols
|
• Dynamic Host Configuration Protocol (DHCP) server
• Point-to-Point Protocol over Ethernet (PPPoE) • Point-to-Point Tunneling Protocol (PPTP) – Layer 2 Tunneling Protocol (L2TP) • DNS proxy • DHCP relay agent • Internet Group Management Protocol (IGMP) proxy and multicast forwarding • Rapid Spanning Tree Protocol (RSTP) • Dynamic DNS (DynDNS, No-IP, ChangeIP) • Network Address Translation (NAT), Port Address Translation (PAT) • One-to-one NAT • Port management • Port mirroring • Software-configurable DMZ to any LAN IP address – Session Initiation Protocol (SIP) Application Layer Gateways (ALG) |
| Routing protocols
|
• Static routing, IGMP proxy
• Dynamic routing • Routing Information Protocol (RIP) v1 and v2 • RIP for IPv6 (RIPng) – Inter-VLAN routing |
| NAT protocol
|
Port Address Translation (PAT), Network Address Port Translation (NAPT) |
| Port forwarding, One-to-one NAT, VPN NAT Traversal, Session Initiation Protocol (SIP), ALG, FTP ALG | |
|
VPN |
|
| Gateway-to-gateway IPsec VPN | 20 IPsec tunnels |
| Client-to-gateway IPsec VPN | 20 IPsec tunnels |
| IPsec VPN
|
Internet Key Exchange (IKE) v2, Generic Routing Encapsulation (GRE), hub and spoke supported |
| PPTP VPN | 20 PPTP VPN tunnels |
| OpenVPN | Support for the OpenVPN server |
| Encryption
|
Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) with 128, 192, and 256-bit keys encryption |
| VPN pass-through | IPsec, PPTP, and L2TP pass-through |
|
Quality of Service (QoS) |
|
| QoS
|
• 802.1p port-based priority on LAN port, application-based priority on WAN port
• 4 queues • Differentiated Services Code Point (DSCP) support • Class of Service (CoS) • Bandwidth management for service prioritization |
| Jumbo frame support
|
Supports jumbo frames on Gigabit ports – at least 1536B |
|
Performance |
|
| NAT throughput | 800+ Mbps |
| Concurrent sessions | 25,000 |
| IPsec VPN throughput | 75+ Mbps |
|
Configuration |
|
| Web-based user interface | Browser-based configuration (HTTP/HTTPS) |
| Management
|
Web-based user interface, Simple Network Management Protocol (SNMP) v3, Bonjour, PnP
Command-line interface via console – limited configuration command support FindIT support for monitoring and management |
| Event logging | Local, syslog, email alerts |
| Network diagnostics | Ping, traceroute, DNS lookup |
| Upgradability
|
Firmware upgradable via browser UI, imported/exported file, USB, Cisco FindIT |
| System time | Network Time Protocol (NTP), Daylight Savings, manual entry |
| Language support | User interface support: English |
|
Environmental |
|
| Power | 54VDC/1.67A |
| Operating temperature | 0° to 40 °C (32° to 104 °F) |
| Storage temperature | -20° to 70 °C (-4° to 158 °F) |
| Operating humidity | 10% to 85% noncondensing |
| Storage humidity | 5% to 90% noncondensing |
| Certifications
|
Safety:
• UL 60950-1 • CAN/CSA-C22.2 No. 60950-1 • IEC 60950-1 • EN 60950-1 Radio approvals: • FCC Part 15.247, 15.407 • RSS-210 (Canada) • EN 300.328, EN 301.893 (Europe) • AS/NZS 4268.2003 (Australia and New Zealand) EMI and susceptibility: • FCC Part 15.107 and 15.109 • ICES-003 (Canada) • EN 301.489-1 and -17 (Europe) – RV260/RV260P rackmount: Class A |
Reviews
There are no reviews yet.